Chapter 79

Bili, Bili's backstage, private messages keep coming.

Most of them are reminders from fans and some technical parties ask about the technical process.

Others are invitations from various platforms and hope to cooperate.

There are even several well-known brands.

Because Lu Cheng did not publish his contact information on the platform, they can only contact through private letters.

"It seems that a popular video has more influence than I thought." Lu Cheng couldn't help sighing.

He looked at the number of fans again.

In just half a day, the number of fans has increased by 100000 to 300000!

The broadcast volume also reached 1.5 million.

As for the scientific and technological points, they have been increased by 1000 again, reaching 7000 points.

however.

Lu Cheng knows that the video was recommended and exposed a few days ago, so there will be a short-term explosive growth.

After a few days, the popularity will decrease, and the playback volume and fan growth will gradually stabilize.

Lu Cheng replied to some private letters, and then put himself into the production of exoskeleton armor again.

Previously, he only made mechanical limbs, but also did not make helmets, breastplates and driving devices behind them.

With the robot knowledge learned from the super Marine Corps, this unfinished part can be enriched.

At the same time.

Lu Cheng also bought some materials needed to make 3D printers online.

Except that the special ink benzotin needs to be upgraded with science and technology, other materials can find the same type or substitute in the world.

After two days of hard work, Lu Cheng finally made the mechanical exoskeleton breastplate.

With the mechanical limbs, it is more handsome.

A bit of a future soldier!

However, Lu Cheng did not publish the video for the first time.

He is going to release all the equipment together after finishing it.

In this way, the effect can be more shocking.

In this way, ten consecutive days passed.

Lu Cheng finally made a full set of exoskeleton armor.

At the same time, the relevant materials for making 3D printers are also purchased continuously.

According to the relevant drawings in his mind, Lu Cheng began to assemble a 3D printer.

Build a framework, set procedures, and polish materials.

It took a full day to finally make the finished product!

This is a three meter wide and five meter high equipment.

The appearance is a bit similar to an ordinary printer, but it is much more complex than an ordinary printer.

At the top is the material input port. After the materials are input, the system will go through internal inspection and classify these materials into various areas!

Then, after importing the modeled 3D map and setting the relevant scale, you can start printing.

The printed finished product will be slowly generated from the outlet made of special nano materials below!

If the height or width of the modeling exceeds the capacity of the 3D printer.

The 3D printer will print layer by layer according to the modeling, and the rest needs to be assembled by itself.

of course.

The width and height of the 3D printer can also be adjusted by itself.

Because Lu Cheng only needs to print and can only use artificial limbs, it is not necessary to make the 3D printer too large.

"Try the effect."

Lu Cheng imported the designed 3D model inflatable doll of teacher tianhaiyi into the 3D printer.

Then, put the relevant materials into the material port and press the start key.

Da da da——

Soon, the 3D printer lit up and began to print.

Five minutes later.

With the sound of "Ding", the inflatable doll was slowly made from the exit.

Lu Cheng opened the finished product warehouse, took out the inflatable doll and began to look carefully!

"Perfect. As like as two peas." Lu Cheng was amazed.

The effect of 3D printer is amazing.

It perfectly reproduces every detail of teacher tianhaiyi.

Each scale is also very accurate, which is almost the same as the modeling graphics.

It's like a little cow basking in the sun - the cow is driving!

Once this product is launched, it must be the gospel of otaku.

Those two-dimensional wives, through 3D printing, can almost perfectly appear in the real world!

No longer in fantasy.

"Cough, this thing still can't be seen by Xi'er." Lu Cheng coughed.

He quickly put the inflatable doll into the material port, and then pressed the factory reset button.

Soon, the inflatable doll was sent to a 3D printer.

A moment later, it became a raw material again.

Of course, the content of the material is reduced.

Just now, when making inflatable dolls, it was impossible to use all the materials.

Some surplus materials will be sent to the waste compartment of 3D printer.

"Compared with exoskeleton armor, this is black technology!" Lu Cheng sighed secretly.

If this 3D printer technology is made public, it will certainly cause earth shaking changes to the production and processing industry!

Not only can the modeling drawings be reproduced perfectly, but also the production time is very short.

"Ten days have passed, and it's time to publish the second video in the series from scratch."

Lu Cheng put the 3D printer in the garage and began to make and edit exoskeleton armor.

After ten days of fermentation.

The popularity of the video also gradually decreased, and finally the playback volume was fixed at more than 3 million.

The number of fans increased to 500000.

A video, 500000 powder suction, can already be called phenomenal!

After all, some up owners may not have this number of fans if they try to update for a year or two.

Lu Cheng looked at the playback volume of other platforms. Although it was not as high as Bili Bili, it also had a considerable playback volume.

The total number of broadcasts on the whole network is almost ten million!

The number of scientific and technological points has also increased by 3000.

However, because Lu Cheng used 2000 technology points to make 3D printers, his current technology points are still only 7000.

"It's really useless. We must earn some science and technology points as soon as possible. When the company is officially established, a 3D printer alone is certainly not enough."

Without further delay, Lu Cheng began to put into the production and editing of exoskeleton armor video.

A day later.

The second video in the zero start series was officially released.

The title is: full version of bone armor from scratch.

It's just been sent out for less than ten minutes.

The playback volume is over 10000 fast.

Bullet screens were also painted.

"He's here. He finally comes with black technology!"

"Ah, this time it's a complete version. It's worthy of being the Lord of conscience."

"The hanging ratio is coming. What hanging is going to be opened this time?!"

"I don't need any skills to do black technology, just open it!"

Lu Cheng was a little confused when he looked at the subtitles of "hanging ratio" on the full screen, and immediately reacted.

A comment asked what skills are needed to make exoskeleton armor. He replied: no skills are needed, just open and hang.

Unexpectedly, it was directly used as a stem to play.

It has to be said that the ability of sand carving netizens to insert needles is quite OK.

However, many netizens put their eyes back into the video after joking.

When they saw the new function of exoskeleton armor, they were shocked again!